英文多语言版Fujikura 9S 熔接机是一款高精度低损耗的熔接机 ，具备 的自动化结构并搭载独特的智能刀片管理技术。作为藤仓 款的熔接机，88S本身性能也是世界 层次，搭配 设计的携带箱和工作台，使它成为远超前代的全新升级版单芯光纤熔接机。
智能刀片管理系统
大容量电池
7秒完成熔接，9秒完成加热
大屏显示
强大的自动化功能
光纤固定夹功能
免工具更换电极棒
智能刀片管理技术
可实时监控刀片状态
可自动旋转刀片磨损的面
可在管理界面直接控制旋转刀面
可在管理界面查看刀片高度
可兼容松套管光纤
拨动白色塑料，可开启兼容松套管光纤的功能
熔接松套管光纤时，无需像大部分熔接机那样更换光纤夹具
具有醒目的功能开启状态提示
可手动更换的电极棒
方便操作人员在电极棒损耗或在户外时进行替换
免去使用工具的步骤，令物镜的维护更方便
重新装好电极棒后记得使用放电校正
极其便捷的套管对准
两夹具边缘距离60mm，热缩套管对准熔接点十分便捷
对整体的熔接加热速度有明显提升
操作更简单，便于新手使用
新设计的工作台
可自由拼接和拆分，适应不同环境
内置大空间，可储存各种工具
配有冷却槽，可以安置加热完的热缩套管
技术参数
Fujikura 90S fusion splicer is a fusion splicer with a high precision lenses, which provide an accurate core-to-core alignment. Also, these lenses allow the splicer to discriminate between fiber types.
FEATURES
- Splicing time: 7-9 sec (SM FAST mode).
- Heat time: 13-15 sec (for 60 mm sleeves).
- Core alignment technology.
- Advanced image processing technology.
- Fiber discrimination function.
- The faster automated features.
- Time for opening wind protector is 80% lower comparing to the Fujikura 80S.
- Time for placing fiber into heater is 50% lower comparing to the Fujikura 80S.
- Easy fiber protection sleeve positioning.
- The lid of the carrying case may be used as a work table.
- Plenty of space in the carrying case. There are two drawers for storage, and the work tray can be divided into two separate places.
- The sheath clamp is compatible with loose tube fiber.
- Wireless data connectivity allows automatic cleaver blade rotation when the splicer judges the blade is worn.
- The tool can connect two cleavers simultaneously.
- Blade life management: the device displays the remaining blade life, informs about blade height and position change, and when new blade is required.
- Operation manual is installed into the splicer.
- Battery life increased up to 500 recharge cycles.
- Increased electrode lifetime – up to 5000 splicing cycles with one set.
- 5-inch color TFT touch screen display.
TECHNICAL SPECIFICATIONS
| Fiber alignment method |
active core alignment |
| Applicable fiber |
fiber type |
Single mode optical fiber |
| Multi mode optical fiber |
| cladding diameter |
80 μm - 150 μm |
| Applicable coating |
sheath clamp |
coating diameter: max. 3 000 μm |
| cleave length: 5 mm - 16 mm |
| Fiber splice performance |
splice loss |
ITU-T G.652: avg. 0.02 dB |
| ITU-T G.651: avg. 0.01 dB |
| ITU-T G.653: avg. 0.04 dB |
| ITU-T G.655: avg. 0.04 dB |
| ITU-T G.657: avg. 0.02 dB |
| splice time |
SM FAST mode: avg. 7 sec - 9 sec |
| AUTO mode: 14 sec - 16 sec |
| Applicable protection sleeve |
sleeve type |
heat shrinkable sleeve |
| sleeve length |
max. 66 mm |
| sleeve diameter |
max. 6.0 mm before shrinking |
| Sleeve heat performance |
heat time |
60 mm slim mode: avg. 9 sec - 10 sec |
| 60 mm mode: avg. 13 sec - 15 sec |
| Fiber tensile test force |
approx. 2.0 N |
| Electrode life |
approx. 5 000 splices |
| Dimensions (W × D × H) |
170 × 173 × 150 mm |
| Weight |
2.8 kg (with battery) |
| Environmental condition |
temperature |
operate: -10°C - +50°C |
| storage: -40°C - +80°C |
| humidity |
operate: 0% - 95% RH non-condensing |
| storage: 0% - 95% RH non-condensing |
| altitude |
max. 5 000 m |
| AC adaptor |
input |
AC 100 to 240 V, 50/60 Hz, max. 1.5 A |
| Battery pack |
type |
rechargeable lithium-ion |
| output |
approx. DC 14.4 V / 6,380 mAh |
| capacity |
approx. 300 splice and heat cycles |
| temperature |
recharge: 0°C - 30°C |
| storage: -20°C - +30°C |
| battery life |
approx. 500 recharge cycles |
| Display |
LCD monitor |
TFT 5 inches with touch screen |
| magnification |
200 to 300x |
| Illumination |
V-grooves |
LED lamp |
| Interface |
PC |
USB2.0 Mini B type |
| external LED lamp |
USB2.0 A type
approx. DC 5 V, 500 mA |
| ribbon stripper |
Mini DIN 6 pin
DC 12 V, max. 1 A |
| wireless |
Bluetooth 4.1 LE |
| Data storage |
splice mode |
100 splice modes |
| heat mode |
30 heat modes |
| splice result |
20 000 splices |
| splice image |
100 images |
| Screw hole for tripod |
1/4-20UNC |
| Other features |
automatic functions |
splice mode select by fiber type analysis |
| discharge power calibration |
| wind protector: open/close |
| sheath clamp: open |
| heater lid: open/close |
| heater clamp: open/close |
| reference guide |
video and PDF file stored in splicer |
| sheath clamp |
easy sleeve positioning clamp |
| electrode |
replaceable without tool |
PACKAGE CONTENTS
- Fusion Splicer Fujikura 90S — 1 pc.
- Battery (BTR-15) — 1 pcs.
- AC Adaptor (ADC-20) — 1 pc.
- AC Power Cord (ACC-14, 15, 16 or 17) — 1 pc.
- USB Cable (USB-01) — 1 pc.
- Fusion Splicer Strap (ST-02) — 1 pc.
- Spare Electrodes (ELCT-16B) — 1 set.
- Fiber Holder Set Plate (SP-03) — 1 set.
- Carrying Case (CC-39) — 1 pc.
- Work Tray Left (WT-09L) — 1 pc.
- Work Tray Right (WT-09R) — 1 pc.
- Work Tray J-Plate (JP-09) — 1 pc.
- Tripod Screw (TS-03) — 1 pc.
- Carrying Case Strap (ST-03) — 1 pc.
- Alcohol Dispenser (AP-02) — 1 pc.
- Quick Reference Guide (QRG-02-E, C or J) — 1 pc.
- Single Fiber Stripper (SS-03 or SS-01) — 1 pc.
- Optical Fiber Cleaver (CT08) — 1 pc.
- Fiber Scrap Collector (FBD-05) — 1 pc.
- Fiber Setting Plate (AD-10-M24) — 1 pc.
- Case for Cleaver (CC-37) — 1 pc.
- Hexagonal Wrench (HEX-01) — 1 pc.
