產品描述

英文多語言版Fujikura 9S 熔接機是一款高精度低損耗的熔接機 ，具備 的自動化結構並搭載獨特的智能刀片管理技術。作為藤倉 款的熔接機，88S本身性能也是世界 層次，搭配 設計的攜帶箱和工作台，使它成為遠超前代的全新升級版單芯光纖熔接機。

 

智能刀片管理系統

大容量電池

7秒完成熔接，9秒完成加熱

大屏顯示

強大的自動化功能

光纖固定夾功能

免工具更換電極棒

智能刀片管理技術

可實時監控刀片狀態

可自動旋轉刀片磨損的面

可在管理界面直接控制旋轉刀面

可在管理界面查看刀片高度

 

可兼容松套管光纖

撥動白色塑料，可開啟兼容松套管光纖的功能

熔接松套管光纖時，無需像大部分熔接機那樣更換光纖夾具

具有醒目的功能開啟狀態提示

 

可手動更換的電極棒

方便操作人員在電極棒損耗或在戶外時進行替換

免去使用工具的步驟，令物鏡的維護更方便

重新裝好電極棒后記得使用放電校正

極其便捷的套管對準

兩夾具邊緣距離60mm，熱縮套管對準熔接點十分便捷

對整體的熔接加熱速度有明顯提升

操作更簡單，便於新手使用

 

新設計的工作台

可自由拼接和拆分，適應不同環境

內置大空間，可儲存各種工具

配有冷卻槽，可以安置加熱完的熱縮套管

技術參數

 

Fujikura 90S fusion splicer is a fusion splicer with a high precision lenses, which provide an accurate core-to-core alignment. Also, these lenses allow the splicer to discriminate between fiber types.

FEATURES

• Splicing time: 7-9 sec (SM FAST mode).
• Heat time: 13-15 sec (for 60 mm sleeves).
• Core alignment technology.
• Advanced image processing technology.
• Fiber discrimination function.
• The faster automated features.
• Time for opening wind protector is 80% lower comparing to the Fujikura 80S.
• Time for placing fiber into heater is 50% lower comparing to the Fujikura 80S.
• Easy fiber protection sleeve positioning.
• The lid of the carrying case may be used as a work table.
• Plenty of space in the carrying case. There are two drawers for storage, and the work tray can be divided into two separate places.
• The sheath clamp is compatible with loose tube fiber.
• Wireless data connectivity allows automatic cleaver blade rotation when the splicer judges the blade is worn.
• The tool can connect two cleavers simultaneously.
• Blade life management: the device displays the remaining blade life, informs about blade height and position change, and when new blade is required.
• Operation manual is installed into the splicer.
• Battery life increased up to 500 recharge cycles.
• Increased electrode lifetime – up to 5000 splicing cycles with one set.
• 5-inch color TFT touch screen display.

TECHNICAL SPECIFICATIONS

Fiber alignment method	active core alignment
Applicable fiber	fiber type	Single mode optical fiber
		Multi mode optical fiber
	cladding diameter	80 μm - 150 μm
Applicable coating	sheath clamp	coating diameter: max. 3 000 μm
		cleave length: 5 mm - 16 mm
Fiber splice performance	splice loss	ITU-T G.652: avg. 0.02 dB
		ITU-T G.651: avg. 0.01 dB
		ITU-T G.653: avg. 0.04 dB
		ITU-T G.655: avg. 0.04 dB
		ITU-T G.657: avg. 0.02 dB
	splice time	SM FAST mode: avg. 7 sec - 9 sec
		AUTO mode: 14 sec - 16 sec
Applicable protection sleeve	sleeve type	heat shrinkable sleeve
	sleeve length	max. 66 mm
	sleeve diameter	max. 6.0 mm before shrinking
Sleeve heat performance	heat time	60 mm slim mode: avg. 9 sec - 10 sec
		60 mm mode: avg. 13 sec - 15 sec
Fiber tensile test force	approx. 2.0 N
Electrode life	approx. 5 000 splices
Dimensions (W × D × H)	170 × 173 × 150 mm
Weight	2.8 kg (with battery)
Environmental condition	temperature	operate: -10°C - +50°C
		storage: -40°C - +80°C
	humidity	operate: 0% - 95% RH non-condensing
		storage: 0% - 95% RH non-condensing
	altitude	max. 5 000 m
AC adaptor	input	AC 100 to 240 V, 50/60 Hz, max. 1.5 A
Battery pack	type	rechargeable lithium-ion
	output	approx. DC 14.4 V / 6,380 mAh
	capacity	approx. 300 splice and heat cycles
	temperature	recharge: 0°C - 30°C
		storage: -20°C - +30°C
	battery life	approx. 500 recharge cycles
Display	LCD monitor	TFT 5 inches with touch screen
	magnification	200 to 300x
Illumination	V-grooves	LED lamp
Interface	PC	USB2.0 Mini B type
	external LED lamp	USB2.0 A type approx. DC 5 V, 500 mA
	ribbon stripper	Mini DIN 6 pin DC 12 V, max. 1 A
	wireless	Bluetooth 4.1 LE
Data storage	splice mode	100 splice modes
	heat mode	30 heat modes
	splice result	20 000 splices
	splice image	100 images
Screw hole for tripod	1/4-20UNC
Other features	automatic functions	splice mode select by fiber type analysis
		discharge power calibration
		wind protector: open/close
		sheath clamp: open
		heater lid: open/close
		heater clamp: open/close
	reference guide	video and PDF file stored in splicer
	sheath clamp	easy sleeve positioning clamp
	electrode	replaceable without tool

 

PACKAGE CONTENTS

• Fusion Splicer Fujikura 90S — 1 pc.
• Battery (BTR-15) — 1 pcs.
• AC Adaptor (ADC-20) — 1 pc.
• AC Power Cord (ACC-14, 15, 16 or 17) — 1 pc.
• USB Cable (USB-01) — 1 pc.
• Fusion Splicer Strap (ST-02) — 1 pc.
• Spare Electrodes (ELCT-16B) — 1 set.
• Fiber Holder Set Plate (SP-03) — 1 set.
• Carrying Case (CC-39) — 1 pc.
• Work Tray Left (WT-09L) — 1 pc.
• Work Tray Right (WT-09R) — 1 pc.
• Work Tray J-Plate (JP-09) — 1 pc.
• Tripod Screw (TS-03) — 1 pc.
• Carrying Case Strap (ST-03) — 1 pc.
• Alcohol Dispenser (AP-02) — 1 pc.
• Quick Reference Guide (QRG-02-E, C or J) — 1 pc.
• Single Fiber Stripper (SS-03 or SS-01) — 1 pc.
• Optical Fiber Cleaver (CT08) — 1 pc.
• Fiber Scrap Collector (FBD-05) — 1 pc.
• Fiber Setting Plate (AD-10-M24) — 1 pc.
• Case for Cleaver (CC-37) — 1 pc.
• Hexagonal Wrench (HEX-01) — 1 pc.

 

付款方式︰ TT

產品圖片