英文语言版藤仓88S光纤熔接机
产品描述
英文版88S藤仓光纤熔接机产品特点
80s/70s 机型的全新升级版，再续一代经典
Fujikura 88S 熔接机是一款高精度低损耗的熔接机 ，具备 的自动化结构并搭载独特的智能刀片管理技术。作为藤仓 款的熔接机，88S本身性能也是世界 层次，搭配 设计的携带箱和工作台，使它成为远超前代的全新升级版单芯光纤熔接机。
屏幕尺寸 5英寸
熔接时间 7秒
满电熔接加热循环 300次
电极棒寿命5000芯以上
熔接记录储存 20000个
智能刀片管理系统
大容量电池
7秒完成熔接，9秒完成加热
大屏显示
强大的自动化功能
光纤固定夹功能
免工具更换电极棒
88s藤仓光纤熔接机技术参数
|
光纤对准方式 |
纤芯对准 |
|
适用光纤类型 |
SMF(G.652), MMF(G.651), DSF(G.653), NZDSF(G.655), BIF/UBIF(G.657) |
|
包层/涂覆层直径 |
80~150μm / 100μm~3mm |
|
光纤切割长度 |
5~16mm |
|
熔接/加热模式 |
100个熔接模式和30个加热模式 |
|
平均熔接损耗 |
0.02dB (SMF), 0.01dB(MMF), 0.04dB(DSF), 0.04dB(NZDSF) |
|
熔接时间 |
ULTRA FAST模式：6秒，SM FAST模式：7秒，SM AUTO模式：10秒 |
|
加热时间 |
250μm涂覆直径，Slim60mm/40mm套管：15秒 250μm涂覆直径，FP-03套管：23秒 900μm涂覆直径，FP-03套管：25秒 |
|
熔接结果存储 |
15000个 记录，100个熔接图像 |
|
光纤观察方式和放大倍数 |
两轴观测4.73”彩色液晶显示器，320倍放大倍数，熔接完成后可放大400 |
|
拉力试验 |
1.96~2.25N |
|
对应热缩套管 |
60mm, 40mm和其它微型热缩套管 |
|
电池熔接加热次数 |
4000mAh BTR-09锂电池充满电可以维持200次的熔接加热 |
|
电极棒寿命 |
熔接5000芯以上 |
|
尺寸/重量 |
146W x 163D x 148H (mm) / 2.6kg (含电池) |
|
通信接口 |
Mini-USB用于PC连接 |
|
操作条件 |
海拔：0~5,000m，风速：15m/s，温度：-10~+50℃，湿度：0~95%RH |
|
三防性能 |
防震：76cm高度的5面向下坠落 |
|
防雨：降水量在10mm/hr的情况下10分钟 |
|
|
防尘：暴露于灰尘中（0.1~500μm大小的硅酸铝颗粒） |
eatures:
- Splicing time: 7-9 sec (SM FAST mode).
- Heat time: 13-15 sec (for 60 mm sleeves).
- Core alignment technology.
- Advanced image processing technology.
- Fiber discrimination function.
- The faster automated features.
- Time for opening wind protector is 80% lower comparing to the Fujikura 80S.
- Time for placing fiber into heater is 50% lower comparing to the Fujikura 80S.
- Easy fiber protection sleeve positioning.
- The lid of the carrying case may be used as a work table.
- Plenty of space in the carrying case. There are two drawers for storage, and the work tray can be divided into two separate places.
- The sheath clamp is compatible with loose tube fiber.
- Wireless data connectivity allows automatic cleaver blade rotation when the splicer judges the blade is worn.
- The tool can connect two cleavers simultaneously.
- Blade life management: the device displays the remaining blade life, informs about blade height and position change, and when new blade is required.
- Operation manual is installed into the splicer.
- Battery life increased up to 500 recharge cycles.
- Increased electrode lifetime – up to 5000 splicing cycles with one set.
- 5-inch color TFT touch screen display.
SPECIFICATIONS:
|
Fiber alignment method |
Active core alignment |
|
Fiber count |
Single fiber |
|
Fiber type |
Single mode, Multi mode |
|
Cladding dia. |
80 to 150μm |
|
Sheath clamp |
Coating dia. : Max. 3,000μm |
|
Cleave length : 5 to 16mm |
|
|
Splice loss |
G.652: 0.02dB, G.651: 0.01dB, G.653: 0.04dB, G.655: 0.04dB, G.657: 0.02dB |
|
Splice time |
SM FAST mode: 7 to 9sec. AUTO mode: 14 to 16sec. |
|
Protection sleeve |
Length: 66mm; dia.: Max. 6.0mm before shrinking |
|
Heat time |
60mm slim mode : 9 to 10sec. 60mm mode : 13 to 15sec. |
|
Fiber tensile test force |
Approx. 2.0N |
|
Electrode life |
5,000 splices |
|
Dimensions |
170W x 173D x 150H (mm) |
|
Weight |
2.8kg including battery |
|
Environmental condition |
Operate: temperature : -40 to 80 degree; Humidity: 0 to 95% non-condensing; Storage: temperature : -10 to 50 degree; Humidity: 0 to 95% non-condensing; Altitude: Max. 5,000m |
|
AC adaptor Input |
AC100 to 240V, 50/60Hz, Max. 1.5A |
|
Battery |
Rechargeable Lithium Ion Output Approx. DC14.4V / 6,380mAh Capacity 300 splice and heat cycles Temperature Recharge : 0 to 30 degree, Storage : -20 to 30 degree |
|
LCD monitor |
TFT 5 inches with touch screen |
|
Magnification |
200 to 320x Illumination |
|
Illumination |
LED lamp |
|
Interface |
PC: USB 2.0 Mini B type External LED lamp: USB2.0 A, Approx. DC5V, 500mA Ribbon Stripper: Mini DIN 6pin DC12V, Max. 1A Wireless: Bluetooth 4.1 LE |
|
Data storage |
Splice mode: 100; Heat mode: 30; Splice result: 20,000; image 100 images |
Standard Package:
88S Splicer, Battery pack, AC adapter, AC power cord, USB cable, Fusion splicer srap, Electrodes(spare), Fiber holder set plate, Carrying case, Work tray, Tripod screw, Carrying case strap, Alcohol dispenser, Quick reference guide, Stripper, CT08 Cleaver
付款方式︰ TT